Glue bottle
Get Quotation Now

Glue bottle market and consumption in the stationary field is huge. Most of the glue bottle on the market are made by injection blow molding machine. We’ve made dozens of successful projects such as 20ml and 50ml and 100ml. IBM manufacturing process make the bottles shiny and glossy with fine treatment.
We also provide cooperative mould of cap and plug of the bottle

KEY PARTS

MACHINE CHOICE

Item 单位Unit ZC-30F IBM-30H IBM50H IBM80H
Dia. of screw mm 40 40 50 60
screw L/D 24 24 24 24
Max.Injection volume cm³ 200 200 400 730
injection capacity g 172 172 344 628
max.injection pressure Mpa 175 175 167 158
max. screw stroke mm 165 165 210 272
screw speed rpm 10-260 10-260 10-260 175
barrel heating capacity kw 6 6 10 19
heating zone qty 3 3 4 5
Injection&Blowing
clamping force of injection KN 300 300 500 800
clamping force of blowing KN 80 80 150 133
opening stroke of mould planten mm 120 120 120 140
lifting height of rotary table mm 60 60 70 75
max. planten size mm 420*300 420*300 580*390 850*390
min.mould thickness mm 180 180 240 280
heating capacity of mold KW 1.2-2.5 1.2-2.5 2.5 4
Ejection device
travel distance of ejection mm 204 204 220 240
Driving system
servo motor capacity KW 11.4 11.4 22 55
hydraulic pressure Mpa 14 14 14 14
Product size range
Product volume L 0.005-0.8 0.005-0.8 0.005-1 0.015-1
product diameter range mm ≦200 ≦200 ≦210 ≦240
product height range mm ≦100 ≦100 ≦100 ≦120
Others
dry cycle s 3 3 3.2 4
discharge rate of compressed air m³/min 1.2 1.2 1.2 1.2
min air pressure Mpa ＞0.8 ＞0.8 ＞0.8 ＞0.8
cooling water flowage m³/h 3 3 3.5 3.5
Machine dimension m 3.05*1.3*2.15 3.05*1.3*2.15 3.8*1.6*2.23 4.5*1.85*2.3
Machine net weight T 4 4 7.5 12
Total rated power KW 18.5 18.5 30 53

VIDEO SHOW